OC1, SURF SKI, KAYAK ALUMINUM V BAR ROOF CARRIER RACK

  • Ad ID #29671
  • Posted 1 month ago
  • 92 Views
  • Facebook Twitter LinkedIn Google+
Description

THE BEST SOLUTION FOR TRANSPORTING YOUR OUTRIGGER CANOE OR SURF SKI

OUR PRECISION PRODUCTS ARE MADE FROM AIRCRAFT GRADE 6061 T6 ALUMINUM AND TYPE 3 AIRCRAFT ANODIZING

LOW PROFILE FLAT BLACK FINISH

There is no easier, safer, or faster system for transporting your craft.  Your hull is supported in its natural shape by 4 inch wide foam covered aluminum cradles. There are no faster loading systems, set your boat in the V Cradle, secure the two bungee cords, secure the cam straps, mount the red flag, and go. Takes less than a minute.

Be safe and have peace of mind, knowing your boat is secure, safe, and well supported.

Our V racks are made in our shop, we use 6061 Aircraft aluminum, Type 3 aircraft anodizing, and US made stainless steel fasteners. No one makes V racks like us!

Our standard V bar with quick release ends utilizes a 7 foot V bar, the quick release ends are 18 inches long (9 inches each), which provides an overall length of 8.5 feet. For some applications, like the Jeep Wrangler pictured, a longer 8 foot bar with quick release ends is needed to cover the span, providing an overall length of 9.5 feet.


Precision laser cut quick release inserts provide a tight, rattle free connection.


Call or email us should you have any questions as to which rack system will work best for your vehicle

Precision laser cut quick release inserts provide a tight, rattle free connection.

 

Contact us should you have any questions as to which rack system will work best for your vehicle

Mounting/Installation Info

Many cars have horizontal bars that run the length of the vehicle. To mount our V Bar, you also need sturdy crossbars which run from side to side and attach to your vehicles horizontal bars. The best crossbars are made by Thule and Yakima, and can be purchased on Amazon.

Our standard hardware will fit cross bars up to 3.5 inches wide and 1.5 inches tall. If you don’t have horizontal bars to begin with, these must be installed as well.

 

PRODUCT INFO

Made in the USA from aircraft grade 6061 aluminum and anodized with Type 3 aircraft anodiizing.

All hardware, bungee tie downs, camstraps, and safety flag included. Hardware is Made in USA stainless steel

oceanpacificproducts.com

MADE IN USA V RACKS

Why a V Rack?

There is no easier, safer, or faster system for transporting your craft.  Your hull is supported in its natural shape by 4 inch wide foam covered aluminum cradles. There are no faster 

There is no easier, safer, or faster system for transporting your craft.  Your hull is supported in its natural shape by 4 inch wide foam covered aluminum cradles. There are no faster loading systems, set your boat in the V Cradle, secure the two bungee cords, secure the cam straps, mount the red flag, and go. Takes less than a minute.

Be safe and have peace of mind, knowing your boat is secure, safe, and well supported.

Our V racks are made in our shop, we use 6061 Aircraft aluminum, Type 3 aircraft anodizing, and US made stainless steel fasteners. No one makes V racks like us!


Q & A

HOW DO OC RACKS MOUNT TO MY CAR?

Many cars have horizontal bars that run the length of the vehicle. To mount our V Bar, you also need sturdy crossbars which run from side to side and attach to your vehicles horizontal bars. The best crossbars are made by Thule and Yakima, and can be purchased on Amazon. Our standard hardware will fit cross bars up to 3.5 inches wide and 1.5 inches tall. If you don’t have horizontal bars to begin with, these must be installed as well.​

WHAT LENGTH BAR LENGTH DO I NEED. WHAT ABOUT QUICK RELEASE ENDS?

We offer three products for specific applications.

Standard 8 foot V bar with bolt on V’s is the simplest. V’s can be removed in 5 minutes with wrench and socket, leaving only the low profile 1.5 x 3 inch flat black bar.  While it is best to have the V bar centered on your crossbars, you can move it up to 1 foot forward of center to clear the opening truck/hatch on small SUV’s and Hatchbacks.  If the bar is too long, consider our Short Bar with Quick Release ends.

7 foot bar with Quick Release V’s allows removal of the V’s in seconds by use of a quick release pin, no tools necessary. Total length is 8.5 feet with ends in place.  

5.5 foot Short Bar with Quick Release V’s is for shorter SUV’s, hatchbacks, and shorter vehicles. With the V’s removed, the shorter 5.5 foot bar allows for the opening of the rear truck/hatch/lift gate. Total bar length is 7 foot overall with ends installed, plenty of length to mount a 21 foot boat.


WHICH V’S DO I NEED?

Standard V’s will work for all OC1’s, OC2’s, shells, racing kayaks/surfskis and sea kayaks. Intermediate size surf skis and kayaks work better with the wide V’s. Boats over 18 inches wide need the wide V’s.

Not sure what you need, call us anytime M-F at 310-396-1453 for helping systems, set your boat in the V Cradle, secure the two bungee cords, secure the cam straps, mount the red flag, and go. Takes less than a minute.

Be safe and have peace of mind, knowing your boat is secure, safe, and well supported.

Our V racks are made in our shop, we use 6061 Aircraft aluminum, Type 3 aircraft anodizing, and US made stainless steel fasteners. No one makes V racks like us!


Q & A

HOW DO OC RACKS MOUNT TO MY CAR?

Many cars have horizontal bars that run the length of the vehicle. To mount our V Bar, you also need sturdy crossbars which run from side to side and attach to your vehicles horizontal bars. The best crossbars are made by Thule and Yakima, and can be purchased on Amazon. Our standard hardware will fit cross bars up to 3.5 inches wide and 1.5 inches tall. If you don’t have horizontal bars to begin with, these must be installed as well.​

WHAT LENGTH BAR LENGTH DO I NEED. WHAT ABOUT QUICK RELEASE ENDS?

We offer three products for specific applications.

Standard 8 foot V bar with bolt on V’s is the simplest. V’s can be removed in 5 minutes with wrench and socket, leaving only the low profile 1.5 x 3 inch flat black bar.  While it is best to have the V bar centered on your crossbars, you can move it up to 1 foot forward of center to clear the opening truck/hatch on small SUV’s and Hatchbacks.  If the bar is too long, consider our Short Bar with Quick Release ends.

7 foot bar with Quick Release V’s allows removal of the V’s in seconds by use of a quick release pin, no tools necessary. Total length is 8.5 feet with ends in place.  

5.5 foot Short Bar with Quick Release V’s is for shorter SUV’s, hatchbacks, and shorter vehicles. With the V’s removed, the shorter 5.5 foot bar allows for the opening of the rear truck/hatch/lift gate. Total bar length is 7 foot overall with ends installed, plenty of length to mount a 21 foot boat.


WHICH V’S DO I NEED?

Standard V’s will work for all OC1’s, OC2’s, shells, racing kayaks/surfskis and sea kayaks. Intermediate size surf skis and kayaks work better with the wide V’s. Boats over 18 inches wide need the wide V’s.

Not sure what you need, call us anytime M-F at 310-396-1453 for help 

oceanpacificproducts.com

aluminum v rack car top carrier kayak OC1 Roof Rack Surf ski
aluminum v rack car top carrier kayak OC1 Roof Rack Surf ski
aluminum v rack car top carrier kayak OC1 Roof Rack Surf ski
Video
This item can be shipped to you!

The seller has indicated they will ship this item to you once payment has been received.

The item will be shipped from Santa Monica, United States of America, shipping charges are dicussed between you and the seller.

Notify Me We will inform you when the product arrives in stock. Just leave your valid email address below.
Email We won't share your address with anybody else.